Modelseries SQUARE Type 655 / 656 / 657 / 660 / 670
Mueholos
      







Modelseries SQUARE Type 655 / 656 / 657 / 660 / 670



Modelseries SQUARE Type 655 / 656 / 657 / 660 / 670  - Multiview Modelseries SQUARE Type 655 / 656 / 657 / 660 / 670  - Singleview
Modelseries SQUARE Type 655 / 656 / 657 / 660 / 670  - Detailview
Modelseries SQUARE Type 655 / 656 / 657 / 660 / 670  - Engineering detail drawing


Scissor arms of the Modelseries 655 - 660 are characterized by an exactly parallel guide, smooth running and greater torsion strength. Their applications are universal, but especially their are advantageous, for example if an exactly positioning is necessary, like in the microscopy technique.



Depending on every type of application you can implement the swivel arms in different versions like as wall-, ceiling- or mobile stand system.



Horizontal and vertical smooth runs are adjustable. The position can be manually fixed by braking mechanisms.


Scissor arm type 655 Scissor arm type 656 Scissor arm type 657 - 660
Scissor arm length L1= 517 mm (short) Scissor arm length L1= 590 mm Scissor arm length L1= 750 mm
  L1= 580 mm (middle) Max load capacity 19 kg Max load capacity 28 kg (type 656
  L1= 845 mm (long)       42 kg (type 660)
Max load capacity 12 kg (short) Length jib L2= 640 mm Length jib L2= 640 mm
  12 kg (middle) Swing angle ± 36° Swing angle ± 36°
  14 kg (long) Working stroke 530 mm Working stroke 710 mm
Length jib
L2= 300 mm
Continuously variable limiter for the opening in low slewing range (0° to 36°).
Swing angle ± 45°
Cable duct inside: 1x 9mm, 1x 1mm Inside cable laying, supply lines for oxygen / gases,
e.g. x 11mm and 2x 5mm.